Siding Installation Cost in Florida (2026)
$3.50–$10.50per sq ft installedtypical 1,500 sq ft of vinyl siding: $5,670–$17,010updated November 2026
Siding is priced per square foot of wall surface, installed. Vinyl is the baseline; fiber cement (James Hardie) runs 40–80% more and wood/stone veneer higher still. Wall area = perimeter × height minus doors and windows — the calculator does that math for you.
Cost calculator — in Florida
Standard vinyl
$4,876
≈ $3.50 per sq ft installed
Premium vinyl / insulated
$9,056
≈ $6.50 per sq ft installed
Fiber cement or engineered wood
$14,629
≈ $10.50 per sq ft installed
Estimate covers 1,393.2 sq ft (includes 8% waste) × per sq ft installed.
Of the mid-range estimate: $4,528 labor · $4,528 materials (typical split)
Common add-ons not in the base price
- Old siding removaladd $0.5–2 per sq ft
- House wrap / insulation boardadd $1–3 per sq ft
- Soffit, fascia, trimadd $2–6 per linear ft
Price ranges we use
Prices updated November 2026| Tier | Unit price | Typical job (1,500 sq ft of vinyl siding) |
|---|---|---|
| Standard vinyl | $3.50 per sq ft installed | $5,670 |
| Premium vinyl / insulated | $6.50 per sq ft installed | $10,530 |
| Fiber cement or engineered wood | $10.50 per sq ft installed | $17,010 |
Typical split: ~50% labor / 50% materials.
Baseline: vinyl siding, materials and labor included. Tampa runs $4-$10/sq ft (1,200 sq ft homes at $7,300-$13,000; average project $7,265); Orlando runs $2.50-$11/sq ft with basic vinyl board at $2-$4.50/sq ft material. Insulated and Dutch lap vinyl reaches $9-$11/sq ft. Low tier sits just under the default sanity floor because entry vinyl genuinely starts near $2.50/sq ft installed in Orlando per Angi. Stucco dominates South Florida exteriors, so vinyl figures reflect the Tampa/Orlando markets.
Sourced from 2+ independent guides. Cross-checked against at least two independent 2025–2026 cost guides.
Sources
- Angi vinyl siding installation cost Tampa FL (2025-08) (retrieved 2026-11-04)
- Angi vinyl siding installation cost Orlando FL (2025-08) (retrieved 2026-11-04)
Estimates are for planning purposes only. Actual prices vary by project details — always confirm with on-site quotes from licensed contractors.
Siding Installation prices across Florida metros
Published prices are usually city-level — the state range above is aggregated from these metros.
Tampa
$4.00–$10.00 per sq ft installed
Orlando
$3.00–$11.00 per sq ft installed
Get exact siding installation quotes in Florida
Calculators give you the ballpark. Local contractors give you the real number — free, no obligation.
Frequently asked questions
How much does siding installation cost in Florida?
In Florida, expect $3.50–$10.50 per sq ft installed. A 1,500 sq ft of vinyl siding typically runs $5,670–$17,010, with most projects landing near $10,530.
Is siding installation more expensive in Florida than the national average?
No — Florida runs about 19% below the national average ($6.50 vs $8.00 per sq ft installed).
How much of the siding installation price is labor vs materials?
Typically about 50% of the total goes to labor and 50% to materials. Labor share climbs on smaller or more complex jobs and in high-cost metros.
How can I pay less for siding installation?
Get at least three itemized quotes — spreads of 20%+ between contractors are common. Schedule work in the off-season (late fall through winter for most exterior projects), bundle neighboring projects together, and keep finishes at mid-range: upgrades on visible surfaces give the best value per dollar.