Asphalt Driveway Calculator Cost in Ohio (2026)
$95.00–$190per ton (mix + paving)typical 600 sq ft two-car driveway at 3 inches: $59,850–$119,700updated November 2026
Asphalt is sold and priced by the ton, but homeowners measure driveways in square feet. This calculator converts your dimensions to tons (145 lbs per cubic foot of compacted mix, plus 5% waste) and prices the job per ton installed, materials and paving included. Residential driveways are typically 2-3 inches over a prepared base.
Cost calculator — in Ohio
Thin overlay / low local rates
$1,087
≈ $95.00 per ton (mix + paving)
Standard 2-3 inch residential driveway
$1,545
≈ $135 per ton (mix + paving)
Thick build, excavation or premium mix
$2,175
≈ $190 per ton (mix + paving)
Estimate covers 11.4 tons (includes 5% waste) × per ton (mix + paving).
Common add-ons not in the base price
- Excavation & gravel base (4-6 in)add $1-3 per sq ft
- Sealcoating (2-3 years later)add $0.5-1 per sq ft
- Removal of old drivewayadd $0.5-2 per sq ft
- Long or steep driveway surchargeadd 10-20%
Price ranges we use
Prices updated November 2026| Tier | Unit price | Typical job (600 sq ft two-car driveway at 3 inches) |
|---|---|---|
| Thin overlay / low local rates | $95.00 per ton (mix + paving) | $59,850 |
| Standard 2-3 inch residential driveway | $135 per ton (mix + paving) | $85,050 |
| Thick build, excavation or premium mix | $190 per ton (mix + paving) | $119,700 |
Ohio sits slightly below the national average: residential asphalt paving runs $2.50-$7/sqft per USA Pave and $3-$10+/sqft per PaveOH Columbus, Angi's Ohio state average is $5,260 per project versus $4,740 nationally, and Columbus driveway paving runs $5.50-$10/sqft for asphalt. Per-ton tiers blend local per-sqft rates with plant-level hot-mix quotes of $70-$93/ton.
Partial data — single main source. Primary source plus national context; treat as a ballpark.
Sources
- Angi Asphalt Driveway Cost (Ohio state data) (retrieved 2026-11-03)
- Angi Cost to Pave a Driveway in Columbus OH (retrieved 2026-11-03)
- PaveOH - Asphalt Paving Cost in Columbus 2026 (retrieved 2026-11-03)
- USA Pave - Commercial Asphalt Paving Costs Ohio (retrieved 2026-11-03)
Estimates are for planning purposes only. Actual prices vary by project details — always confirm with on-site quotes from licensed contractors.
Get exact asphalt driveway calculator quotes in Ohio
Calculators give you the ballpark. Local contractors give you the real number — free, no obligation.
Frequently asked questions
How much does asphalt driveway calculator cost in Ohio?
In Ohio, expect $95.00–$190 per ton (mix + paving). A 600 sq ft two-car driveway at 3 inches typically runs $59,850–$119,700, with most projects landing near $85,050.
Is asphalt driveway calculator more expensive in Ohio than the national average?
No — Ohio runs about 10% below the national average ($135 vs $150 per ton (mix + paving)).
How can I pay less for asphalt driveway calculator?
Get at least three itemized quotes — spreads of 20%+ between contractors are common. Schedule work in the off-season (late fall through winter for most exterior projects), bundle neighboring projects together, and keep finishes at mid-range: upgrades on visible surfaces give the best value per dollar.